Preventative Maintenance Service

Arrive at the designated vessel:
___ Inspect dock lines & fenders assure all are properly adjusted
___ Inspect exterior appearance, note and cosmetic discrepancies
___ Inspect exterior canvas, assure all is in place and secure

Inspect vessels electrical system:
___ Inspect shore power connection and cable
___ Turn on lights throughout vessel, replace bulbs as necessary
___ Inspect DC battery system, add water as necessary
___ Assure charger is working properly

Inspect main engines and generators:
___ Check oil and water levels in prime movers and transmissions
___ Start engines and allow to reach operating temperature
___ Check for leaks; oil, water, exhaust
___ Transfer electrical load to generators
___ Shut down engines, transfer electrical load to shore power, shut down generators at end of inspection

Inspect onboard air conditioning system:
___ Turn on all units while generators are running
___ Check and clean raw water sea strainers as necessary
___ Check return air filters clean as necessary
___ Turn off A/C units before transferring load back to shore power

Inspect shaft and rudder gland/seals:
___ Inspect securing clamps
___ Inspect for leaks
___ Inspect associated hardware and fittings

Cycle toilets, inspect associated components:
___ Inspect toilet bowls and seats, assure all are secure
___ Assure toilets are working properly
___ Inspect associated components for proper function and leaks

Inspect potable water system:
___ Assure water tank is full, add water as necessary
___ Run faucets to cycle fresh water through system
___ Wipe out sinks after test

Inspect bilge areas, bilge pumps & sumps:
___ Open bilge access check for signs of excessive water
___ Inspect bilges for discoloration or odors
___ Inspect pumps & auto float switches
___ Inspect sumps